Serial number look up. I often use HyperTerminal in Windows XP. The problem is that it just supports COM and telnet. I know COM Port is very old-fashioned, but I can't replace it with USB because there is no such program for USB.
Is USB bad for connecting computers? Or I just mistaked something?

• Usb To Serial Driver Download

1 Answer

First, you should use PuTTY instead of Hyperterminal as it's better in pretty much every way.

A terminal will commonly work with the following methods of communication:

First check whether your PC has a serial port or not. If not then you have to use an USB to RS232 converter cable. Install the driver from the cd of USB-2-RS232 converter into your PC. It’s provide a virtual serial port to use. Now connect RS232 part to your device and USB part to your PC. Seems that your device use an internal USB-RS232 converter. However, if you succeed in Hyperterminal (so your serial settings baudrate. To set up a serial terminal connection in HyperTerminal, First enter a name for your connection, click OK. Select your COM port under “connect using”. Click Configure and change the port settings to match the settings required by the device you are connecting to.

Eng & rom eng & rom eng & rom eng & rom rom.&eng eng& rom rom. Eng & rom eng & rom eng & chinese eng & rom all sub. Filme coreene online gratis subtitrate. Eng & rom eng.& rom.& rus. Rom & eng eng & rom eng. Eng & rom eng & rom eng & rom eng.

• Telnet using TCP/IP
• SSH using TCP/IP
• Serial port using RS-232

Usb To Serial Driver Download

The first two require the device you are trying to reach has an IP and supports the protocol in question.The second requires the device be connected to your system via a COM port on Windows.

Now if you are expecting to do a RS-232 style terminal connection over USB, it must be a USB serial port. You can buy RS-232 to USB converters. Some devices have a USB port that implements a RS-232 to USB converter internally. Fairy tail english dub kissanime. On Windows, for any kind of hardware like this, you'll likely need to install a manufacturer-provided driver - this is probably why you are having trouble. Then, in devmgmt.msc, under Ports, you'll see an extra COM port. You can use this to talk to your device through PuTTY (or Hyperterminal, if you insist.)

Not the answer you're looking for? Browse other questions tagged networkingusbrs232hyperterminal or ask your own question.

In order to set it up, first you have to find it on your computer. Long long ago, almost all computers had two serial ports, called 'COM1' and 'COM2', one a with a nine pin and the other with a 25 pin connector.
Now times have changed and the serial port has vanished.
Don't give up hope, however. The USB to serial converter has arrived, and it can be used instead. It is usually a dongle which plugs into a USB port, with a nine pin male connecter at the other end.
On my desktop computer, the motherboard has two built in serial ports. The third seial port, here labelled COM4, belongs to the USB to serial adapter I have plugged in.
So, to find the serial port on your computer, scout around its back. If you find a nine pin male connector (two rows, five and four, pins sticking out inside a metal shell) it has a serial port built in.
Or get a USB to serial converter and plug it in.
Open up Device Manager. Right click on 'My Computer' and select properties (at the bottom of the list that pops up). Click on the 'Hardware' tab. Click on the 'Device Manager' button and a something similiar to this picture should appear.
Click on the '+' sign on the left of the 'Ports (COM & LPT) to expand it. The list of printer and Serial ports available will be shown. Make a note of those, you will need them in the steps that follow.